Fig. 12
Fig. 13
Fig. 11
Mechanical stop
in opening
Mechanical stop
in closing
outside
inside
Inside Opening Installation
Outside Opening Installation
outside
inside
GATE ARRANGEMENT
You must do some checks on the gate to see if fitting a SURF system is possible:
A.
(Make sure that) the fixed and moving parts of the gate are strong and non-deformable;
B.
The length of each gate leaf must not exceed 11,48 feet for SURF 350/350 24V, always respecting the
graph;
C.
The weight of each gate leaf must not exceed 661 pound for SURF 350/350 24V always respecting the
graph;
D.
The hinges and general structure must be in good conditions and the gate must move smoothly
throughout its whole travel;
Where possible, it is advisable to install limit switch stops on the ground for a good functioning of the
operator.
MECHANICAL INSTALLATION
International registered trademark n. 2.777.971
SURF
9
67410720
Rev. 04 - 06/2014
