MECHANICAL INSTALLATION
International registered trademark n. 2.777.971
SURF
11
67410720
Fig. 15
BACK FIXATION MOUNTING
If the back fixing has to be screwed (Fig.16) and the (A) holes are used, the fixing must be cut at a distance
of 2,55 inches from its end, if instead you use the other holes it is not necessary to do the cutting.
The support must be positioned so that the operator is in perfect horizontal position (Fig.19).
N.B.
: During assembling the back and front fixations lubricate with water repellent grease.
a
d
b
2,36
6,10 Min.
1078
2,36
6,10 Min.
d
WARNING:
During installation, make sure
that the cables do not interfere with the
niche.
7,87
3,14 Min.
INSTALLATION ON MASONRY PILLARS, MAKING A NICHE
If you have to make a niche observe the
dimensions shown in fig.15.
DIMENSIONS IN inches
A
A
A
A
A
2,
55
n
.
i
Fig. 16
Back fixing
to be screwed
Rev. 04 - 06/2014
