ACCESSORIES
FOR
COMPACT
CARRYING BOX INOX
RELEASE
RELEASE PLUS
KIT MECHANICAL STOP
SAFETY GATE
ENGLISH
DECLARATION OF CONFORMITY
SEA declares under its responsibility that the products
Compact 400, Compact 800
meet the essential requisites provided for by the following European Directive and following changes:
89/392/CEE (Machine Directive)
89/336/CEE (Electromagnetic Compatibility Directive)
73/23/CEE (Low Tension Directive)
SAFETY PRECAUTIONS:
All electrical work should conform to current regulations. A 16 A 0,030 A differential switch must be incorporated into the source of the
operators main electrical supply and the entire system properly earth bonded. Always run mains carrying cables in separate ducts to
low voltage control cables to prevent mains interference.
INTENDED USE:
Compact 400 and Compact 800 undergrounded operators have been designed to be used only for the automation of swing gates.
SPARE PARTS:
To obtain spare parts contact:
SEA s.r.l. -Zona Ind.le, 64020 S. ATTO Teramo Italia
SAFETY AND ENVIRONMENTAL COMPATIBILITY:
Don’t waste product packing materials and/or circuits.
When being transported this product must be properly packaged and handled with care.
MAINTENANCE AND OUT OF SERVICE:
The decommission and maintenance of this unit must only be carried out by specialised and authorised personnel.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY
IMPROPER USE OF THIS PRODUCT.
SEA
reserves the right to do changes or variations that may be necessary to its products with no obligation to notice.
67410850
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
REV 04 - 01/2010
17
