Sea Tel 9497B-21, Инструкция по установке и эксплуатации

Страница: 27 / 104

9497B-21 C/Ku-Band TVRO Installation
4-9
6. Open each seam wide enough
to install a good bead of
silicone caulk, apply Loctite to
and firmly tighten all of the
bolts in that seam (Smaller
dual beads of caulking can be
applied from outside and
inside if you prefer).
7. Clean excess caulking off of
the flange areas inside and
outside the radome.
8. Repeat caulking, closing and
cleaning the vertical flanges
until all of the upper panel
seams are closed.
9. Remove tape from the vertical
seams.
10. Apply a 3/8” layer of caulking
to the under-side of the
perimeter flange of radome
cap.
11. (Outside person) Climb onto
the upper panel assembly,
have someone (third person
required only for this step)
hand the cap to the person on
top of the radome.
12. Insert the cap into the top of
the radome with a twisting
rotation. This will evenly
spread the caulking and align
the bolt holes inside the
radome top (co-ordinate with
the person inside the
radome).
13. (Inside Person) Install the
radome cap using the
provided hardware.
CAUTION: Do NOT over
tighten the hardware. Only
tighten until the fiberglass
STARTS to flex.
14. Apply additional caulking to
fill gaps between the upper
panels and the cap.