Sea Recovery Aqua Matic XL Series Скачать руководство пользователя страница 7

Страница: 7 / 142

About this Manual

About Sea Recovery

Since 1981, Sea Recovery Corporation has produced water desalination systems, used in various applications,

for customers around the world. Currently, Sea Recovery Corporation stands apart as a leader in advanced water

desalination systems for leisure marine applications.

Sea Recovery Corp.
P.O. Box 5288
Carson, CA 90745-5288
[email protected]
www.searecovery.com

Purpose

This manual is intended for Sea Recovery’s system technicians, technical support and training personnel. It contains

technical information and instructions for the installation, operation, maintenance and troubleshooting of the Aqua

Matic XL. Sea Recovery’s RO desalination systems are designed and engineered to function as complete, working

units and are subject to cascading failure if installation, operation and maintenance instructions are not followed

correctly. Thus, the intent of this manual is to familiarize you, or other installer(s) and/or operator(s) with each

system component. With a core understanding of the function, importance and normal operation of each subsystem

component, you will be equipped to diagnose minor problems, which, if detected early on, are typically correctable.

Note that if a minor component problem is left uncorrected, it can affect the rest of the system and lead to more

extensive issues and/or damage.

Important:

Sea Recovery encourages you to read the Aqua Matic XL manual thoroughly before attempting

installation or operation, as well as to keep the manual for future reference. By gaining a better understanding

of your system, you will be equipped with the knowledge to achieve optimum performance and a longer

service life.

Updates

From time to time, Sea Recovery Corporation may make programming changes to the control logic. Other physical

production changes may also be made, and are tracked by Sea Recovery Corporation through the System's serial

number.

Remember:

Troubleshooting and repair method results can vary depending on the information that is

displayed on the

SYSTEM INFORMATION

screen.

•

SERIAL NUMBER:

Helps Sea Recovery Corporation to determine the latest physical version and configuration

of your System, ensuring that you are provided with correct part information.

•

TYPE:

Tells Sea Recovery Corporation the production capacity of your System, which provides a bench mark in

diagnosing product water flow and pressure concerns.

•

VERSION:

Allows Sea Recovery Corporation to determine the specific sequential operation of the System based

on the programming control logic version.

vii

Содержание Aqua Matic XL Series















































































































































Результаты поиска

Содержание Aqua Matic XL Series

Отзывы:

Бренды по названию

Популярные бренды

Sea Recovery Aqua Matic XL Series, Руководство пользователя

Результаты поиска

Содержание Aqua Matic XL Series

Отзывы:

Бренды по названию

Популярные бренды