Sea Ray 52 Sundancer, Руководство пользователя

Страница: 175 / 210

52 Sundancer
®
(525 Sundancer
®
)
7.9
S
ECTION
7 • A
CCESSORIES
& O
PTIONS
F. W
ATER
H
EATER
The 52 DA 20 gallon (75.7 liters) water heater is
located in the small compartment behind the salon
entry ladder. (Figure 2.6.1.) It operates on the 120
volt dockside system or generator and has a circuit
breaker on the AC main distribution panel in the
salon.
The water heater has a check valve to prevent hot
water from back-washing into the cold water
source and a pressure relief valve to avoid damage
to the heater from over pressure or excessive
temperature.
O-RING
• Screw filter body onto
filter head, making sure
the O-ring is in place.
REFER TO OWNER’S MANUAL PACKET FOR
INSTRUCTIONS AND WARRANTY INFORMATION.
Make cer tain the hot water lines are air free ,
indicating the water heater is full. Damage will
occur to water heater if it is not full when turned
on.
! WARNING
(F
IG
.7.9.1)
I
NITIAL
S
TART
-U
P
O
R
A
FTER
W
INTERIZATION
:
1. Make sure the WATER HEATER breaker is OFF.
2. Fill the heater with water.
3. Open the hot water faucets until all air is
eliminated from the system.
4. Make cer tain the heater is full of water.
COMPLETE FAILURE OF THE HEATING
ELEMENTS WILL RESULT IF THEY ARE NOT
COMPLETELY IMMERSED IN WATER AT
ALL TIMES.
5. Turn the WATER HEATER breaker ON.
To maintain water heater properly, drain whenever
the possibility of freezing occurs and frequently
inspect lines and connections for leaks.
REFER TO OWNER’S MANUAL PACKET FOR
INSTRUCTIONS AND WARRANTY INFORMATION.