SDLG WP6, Руководство по обслуживанию

Страница: 53 / 121

Service Manual for WP6 Diesel Engine
43
332 Disassembly, Inspection, Maintenance and Assembly of Engine Block
Module
3321 Exploded View of Engine Block Module
Engine block
Thrust bearing cap
Main bearing bolt
Main bearing bolt
Main bearing cap
Fig. 3-12 Exploded view of engine block module
3322 Steps to Disassemble Engine Block Module
(1) Remove main bearing bolts (key pint 1);
(2) Remove main bearing caps (key pint 2);
3323 Inspection and Maintenance of Engine Block Module
Key point 1:
Inspection:
Check and clean engine block. Including but not limited to: Assembly environment must be clean;
check engine block finished surfaces for crash damage, scratch and rust; do not bump and scratch
the parts during assembling, and besides special requirements, sharp corner and edge on parts must
be smoothed.