SDLG WP6, Руководство по обслуживанию

Страница: 30 / 121

Service Manual for WP6 Diesel Engine
20
Fasten or replace some parts when necessary, in order to ensure good sealing performance of intake
system.

Check air filter element
Maximum allowed intake resistance for the engine is 6kPa, maximum intake resistance must be
measured when the engine is running in rated speed and full load, if the intake resistance exceeds
maximum allowed value, the filter must be cleaned or replaced according to the regulations of
manufacturer.
NOTICE: By no means should an engine without air filter be running, Otherwise infiltration
of dust and impurities will lead to premature wear of engine.
Fig. 2-15 Air filter
Remove the filter element from air filter, pat its end faces gently to clean the dust on it, blow it with
compressed air reversely (from inside to outside) is also feasible.
Fig. 2-15 Air filter element
NOTICE: Do not let the air broke filter paper and do not clean filter paper with water or oil,
do not pat or strike the filter element fiercely and damaged filter element and seal ring must
be replaced.