SD Biosensor SD Gluco Navii, Инструкция по эксплуатации и процедурам

Страница: 17 / 40

15
1. Remove a new test strip from vial. Be sure to tightly close vial cap after removing
test strip.
2. There are two ways to turn the meter on. The first method is to press the ON/OFF
button. The second method is to insert the test strip into test strip slot and the meter
turns on automatically.
3. When the blood drop symbol flashes next to the test strip symbol (Blood Stand-by
Display) , you are ready to perform a test.
4. Before you perform a test, you have the option to mark the test as either post-meal
or pre-meal test by pressing the right button. Press the RIGHT button once for
pre-meal or twice for post-meal. Pushing the RIGHT button again will turn OFF meal
mark for that test.
PERFORMING A BLOOD GLUCOSE TEST
NOTE
• Always wash hands with warm, soapy water. Rinse and dry them before
testing.