SD Biosensor MultiCare 03MA10, Руководство пользователя

Страница: 17 / 38

19
Stage 14. Setting – Repairing the Printer
In the fourteenth stage, you can set the analyzer to be automatically paired
with the previous paired printer, whenever the printer is near the analyzer.
After the Bluetooth with printer setting, the repairing setting will appear on
the screen.Select ON or OFF by pressing the left (

) or right (

) button, and
then save it by pressing the Enter button. If you select it ON, the analyzer
search another printer near the analyzer when not searching the previous
paired printer. If you select it OFF, the analyzer does not search another
printer and complete the printing.
STEP 3. Insert a Code Chip
Coding
The code chip is included in the test kit package. The code chip provides the
analyzer with important information on the production-specific properties of
each test kit in order to measure your results accurately. Before you use your
analyzer with a new test kit for the first time, you should check that the code
number between the analyzer and test kit are the same.
Code Setting
1) Make sure the analyzer is turned off. Remove the old code chip if one
is installed.
2) Insert a new code chip until it snaps into place.
3)
Turn the analyzer ON and insert the test panel. The code number will appear
and this number must match the code number provided on the test kit box. If
it does not, repeat steps 1 and 2 above.
ex) Inserting test panel after inserting the code chip for HbA1c