Scytek electronic 2000RS страница 32 Скачать руководство пользователя

Страница: 32 / 48

Page 28 - Galaxy 5000/2000RS-DBP

Mounting the Control Unit

The control unit must only be mounted in the interior of the vehicle. Do not mount the main unit in

the engine compartment. Choose a mounting location that will not be easily accessible to a thief, and

will not interfere with the operation of any vehicle components such as foot pedals, steering column,

air vents, seat rails, etc.

Do not mount the control unit until after setting the internal jumpers and performing a complete

operation check of the system. After installation is complete and performance verified, the control unit

can be easily mounted using wire ties through the mounting tabs on the bottom of the unit.

Mounting the Siren

Choose a siren mounting location that is away from heat sources such as exhaust manifolds, and

where it cannot be easily accessed from underneath the vehicle. Be sure to face the siren

downward to prevent the collection of water in the siren’s housing.

Always route all wires from the engine compartment into the interior of the vehicle through a proper

grommet.

Mounting the Shock Sensor

Choose a suitable interior mounting location for the shock sensor that provides ample coverage of the

vehicle. Keep the sensor away from the vehicle’s ECM or other sources of electrical interference.

Suggested mounting locations include air conditioning ducts, dashboard braces, or center console

supports.

During proper operation, the shock sensor will detect impacts to the vehicle only and will not usually

be triggered by slow rocking movements of the vehicle like those caused by wind.

Содержание 2000RS

















































Результаты поиска

Содержание 2000RS

Отзывы:

Похожие инструкции для 2000RS

Бренды по названию

Популярные бренды

Scytek electronic 2000RS, Руководство по эксплуатации продукта

Результаты поиска

Содержание 2000RS

Отзывы:

Похожие инструкции для 2000RS

Бренды по названию

Популярные бренды