background image

Standard Remote Transmitter Description

Depending on the model chosen, the Galaxy 5000/2000RS-DBP Series will be supplied with one or two  

T5

or T5-SP 

5-button Remote Transmitters that are used to  control the system’s operations.  

Note

: Using the optional PC or Pocket PC interface with the network software, it is possible to reconfigure

the functionality of the transmitter buttons. The standard (default) setting for operation of the transmitters

is described below. 

Button 1  Arms and Locks the system and when held for 5 seconds, activates the system’s Panic feature.

Button 1 also locks the doors when the system is in Valet Mode.
Button 2 Disarms and Unlocks the system. Pressing Button 2 again operates the Passenger Unlock feature

(if installed). 

Button 2 also unlocks the doors when the system is in Valet Mode.

Button 3 Activates the Auxiliary 1 output. This output will remain on for as long as the button is pressed.
Button 4 Activates the Remote Start feature. 
Button 5 is the Page Shift button. Each time the Shift Button is pressed, the LED on the transmitter will

illuminate and the transmitter functions will shift to the next page, allowing access to another set of

features.  Once shifted to another page (there are 4 pages total), the transmitter will remain on that page

for 10 seconds or until a button is pressed, then it will return to page 1.  Under normal operation, only

pages 1 and 2 are used.  Pages 3 and 4 are usually used for Two Car Operation (see page 3) or optional

expansion modules.
Shift then Button 1 Arms/Locks the system silently.
Shift then Button 2 Disarms/Unlocks the system silently.
Shift then Button 3 Activates the Auxiliary 2 output. This output will remain on for as long as the button

is pressed.
Shift then Button 4 Activates the Auxiliary 3/Factory rearm output.

Remote  Transmitters

Button 2

Button 5

Button 3

Button 4

Page 2   -   Galaxy 5000/2000RS-DBP

LED

LED

Button 2

Button 4

Button 5

Button 1

Button 1

Button 3

T5-SP

T5

Содержание 2000RS

















































Отзывы: