Sculpt Fireplaces epi950, Инструкция по установке и эксплуатации, Страница: 36 / 56

36
5.2
HeBel inStallation
step 14: side walls
Using Hebel build a layer of bricks from the base to the top of
the ceiling on either side of the enclosure.
side Vents
if you are installing your appliance with side vents, ensure you
leave the necessary gaps when constructing the side walls.
(Please refer back to step 12 & 16)
step 15: duCting Continued...
install the ducting to each transition piece and extend into the
roof space and to the desired room(s). Cut a hole in the ceiling
and install a metal register into the ceiling of the room the
vents will be allocated in. if more ducts are required additional
components and duct design is to be provided by the retailer or
installer.
**please note: a maximum duct run of 6m is recommended
without the assistance of an in-line fan. a maximum of four
ducts can be run off the axis h1200, h1200ds, h1400 and
epi950 models, and a maximum of six ducts for the axis
h1600, h1600ds, h1600XXl and h1600XXlds models.
please note that an in-line fan on a double sided
model is prohibited.
step 16: triple skin flue
triple skin flue is to then be continued above the cavity lid. the
lower end of the triple skin casing shall be close fitting against
the lid and the outer casing must be ventilated. air vents on
the first length of triple skin flue must be cut by the installer.