
28
step 7: first length of flue
Place the first single skin length of flue (with no crimp ends)
around the outside of the spigot. you may also use a heat
resistance sealant(i.e.Firecork) to seal any air gaps. Before
installing the remaining lengths of flue. prior to continuing with
flue installation please continue to the next step.
step 8: side walls
Using masonry(ie. clay bricks) build a layer of bricks from
the base to the top of the ceiling on either side of the firebox.
remember to leave a 25mm air gap on all side of the unit.
**iMPortant**
if you are installing your appliance with side vents please allow
for the vent openings in the cavity exterior.
Ventilation is required on the enclosure to help with air
circulation. a minimum of two air intake grills are required
at the bottom and a minimum of two air out-take grills are
required at the top of the masonry enclosure. all vents can be
positioned either side or the front of the masonry enclosure.
minimum vents sizes are 100mm x 300mm with a minimum
quantity of four*
step 6: trim
(optional step)
**important**
Trim must be fitted onto the firebox PRIOR to installing the
front of the enclosure.
1. Manoeuvre the trim on the front of the firebox
2. On the side of the façade of the firebox drill two holes at
4.2mm.
3. the holes must match with the slotted holes on the trim
4. manoeuvre the trim into desired position.
5. Fix the trim into place the screws provided (screws M5 +
washers).
5.1
maSonry Brick inStallation
Содержание epi950
Страница 5: ...5 ...
Страница 50: ...50 ...
Страница 56: ...56 1300 851 304 info sculptfireplaces com au PO Box 1232 Mornington VIC 3931 Edition 25 05 17 ...