3
▪
Power On
: With xWallet Off, touch the entire finger sensor for about
1 second
with a finger.
▪
Power Off :
With xWallet On, touch the entire finger sensor for about
3 seconds
with a finger.
** With xWallet On, the power turn off automatically after 1 minute.
TouchWallet Start (2/4)
–
Power On/Off, Fingerprint Registration
Power Off
▪
At “initial use (without fingerprint registration) or fingerprint reset,” you
will need to perform a new fingerprint registration.
▪
When the power is On touching the finger sensor,
“Enroll Finger”
message is displayed. Begin registration by touching the finger sensor.
▪
With repeated fingerprint touch,
“Progress ¼“ registration progress
message appears
.
** Usage Tip : As shown below with
varying fingerprint location
, register for
the
total of 4 full fingerprints.
▪
When fingerprint scanning is complete, “Verify
Finger? Message is
displayed.
▪
After successful fingerprint verification, “Success” message is displayed,
Then, “Main Menu” is displayed.
▪
When failed, “Fail” message is displayed. Just retry the verification.
Power On
Power On/Off
Fingerprint Registration
[Without Registered Fingerprint, Power On Display]
[With Registered Fingerprint, Power On Display]
¼ session
2/4 session
¾ session
4/4 session
TouchWallet
[Fingerprint Registration Ready]
[Begin Fingerprint Registration]
[Fingerprint Verification Ready]
[Fingerprint Verification Complete]
