SCS Pactor, Руководство по установке

Страница: 35 / 61

1. Introduction
1 Introduction
1.1
SCS
-PTC, the Original
Thank you for purchasing your
SCS
-PTC.
SCS
-PTC’s are the original PACTOR mode
modem developed by the people who have created all PACTOR modes. From
SCS
and
SCS
representatives, you will receive the best possible support and benefit from the concentrated
knowledge of the PACTOR engineers who invented PACTOR.
1.2 Packaging list
This is a complete list of hardware and software supplied with the
SCS
-PTC:
•
1 x PTC
•
1 x Installation Guide
•
1 x
SCS
CD-ROM
•
1 x Power Supply Connector
•
1 x 8 pole DIN cable
•
1 x 13 pole DIN cable (PTC-IIpro, PTC-IIusb, PTC-IInet)
•
1 x RS232 cable (9 pin male connector to 9 pin female) (PTC-IIpro, PTC-IIex)
•
1 x USB cable (PTC-IIusb)
•
1 x RJ45 Patch cable (PTC-IInet)
1.3 Requirements to operate a PACTOR Mode Modem
A transceiver capable of switching between transmit and receive within 20 ms. Most modern
transceivers fulfill this requirement.
A computer that provides a serial interface (COM port) compatible with the RS232 (V24)
standard.
An appropriate terminal program to operate the serial interface with a baud rate in the range
between 2400 and 115200
Many modern computers (especially laptops) do not have a serial COM connector. For these
computers a USB to RS232 converter can be purchased from most computer stores and
SCS
representatives. With the help of this adapter you can easily operate the PTC with the USB
interface of your computer.
For the PTC-IIusb you need a computer with USB connector.
For the PTC-IInet you need a 10Base-T or 100Base-TX Ethernet.
1.4 About this installation guide
This installation manual contains only relevant information about the installation of your
SCS
–PACTOR mode modem and popular applications like HF email. You can find complete
documentation and detailed descriptions of the command set of the PTC in the electronic
version of the complete manual (PDF format) on the
SCS
CD-ROM supplied with your PTC.
29