6
3.4 Enter into the TEST Mode
There are 3 states in TEST Mode: preview state (preview the scene in
the front of the camera), setting state (make customer settings), and playback
state (view Photos or videos via 2.0” TFT display).
(Note: SG560P0 model has no preview and playback.)
3.4.1
Preview
After switching the camera to TEST Mode, it enters into the preview state.
Press
to exchange between playback mode and preview mode;
3.4.2
Customer Settings
Press
MENU
to manually customizing the camera settings which
displayed on the screen or external TV monitor. The detailed operations will
be described in “Advanced Operations” chapter.
3.4.3
Manual Capturing
Press
to manually capture photos or record videos. Press again
to stop the manual capturing of a video.
3.4.4
View Images
or Videos
There are two ways to view the captured images or videos:
1. LCD screen on the control
2. TV monitor which connect to camera with TV cable
Press
to view images or videos, the latest image or video will be
shown in the LCD screen on the control or TV monitor. Press
“
▲
”
or
“
▼
”
to
view the previous or next image or video.
3.4.5
Delete Images
or Videos
Press
DEL
to delete images or videos .Note the
DEL
button just works in
Playback state. So if it’s in Preview state, you should press
to enter into
Playback state.
3.5 Triggering modes
There are 3 triggering modes of the camera: PIR triggering
，
Timer
triggering and PIR&Timer triggering.
3.5.1
PIR Triggering
PIR triggering is the default setting. The camera works only when motions
get detected, while, if PIR sensitivity is set as
PIR OFF
, the camera stops PIR
triggering.
3.5.2
Timer triggering
The
Timer interval
Default setting is
OFF
which means the timer
triggering is disabled. While changing the timer triggering interval to a
non-zero value, the camera starts to work at a preset interval. User need to
OFF the PIR triggering (choose
PIR sensitivity
as
PIR OFF
) if want the
