Scout Guard DTC-560K, Руководство пользователя

Страница: 11 / 17

10
un-highlighted.
Press MENU to return to info display.
4.1.9
Set PIR Triggering Interval
This parameter means that how long the PIR (Passive Infrared motion
sensor) will be disabled after each triggering in ON mode. During this time the
PIR of the device will not react to the motion of human (or animals). The
minimum interval is 0 second, it means the PIR works all the time. The
maximum interval is 1 hour, it means the PIR will be disabled for 1 hour after
each triggering. The default value is 1 minute. Press “
◄ ” and “ ► ” to
decreases or increases the value.
The following shows how to set triggering interval time to 5 Minutes
provided that the previous value is 1 Minute .
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select PIR Interval .
c) Press “ ► ” to decrease or increase to 5 Minutes .
d) Press OK to save the current setting and the option will be
un-highlighted.
Press
MENU to cancel setting and return to info display.
4.1.10
Set Timer Triggering Interval
This camera has a new function, time laps function
，
which means the
camera captures images or videos at a preset time intervals regardless of
weather there are motions get detected. The default parameter is
OFF which
means the timer function is disabled. When changing this parameter to a
non-zero value, it starts to take photos at given time interval. The value
ranges from 10 seconds to 8 hours. Press
“ ◄ ” and “ ► ” to decreases or
increases the value.
The following shows how to set timer interval to 1 hour provided that the
previous value is OFF .
e) Press MENU to display the setting menu.
f) Press “ ▲ ” or “ ▼ ” to select Timer Interval .
g) Press “ ► ” to decrease or increase to 1 hour .
h) Press OK to save the current setting and the option will be
un-highlighted.
Press
MENU to cancel setting and return to info display.
4.1.11
Set Timer Switch
This parameter defines a certain time lapse in a day when the camera can
be triggered, while in the rest of the time lapse the device is shut off. The
effective value ranges from 00:00:00 to 23:59:59.
Timer Switch OFF means the camera works all along; Timer switch ON
means the camera works only during the time lapse according to the preset
settings.
Please note that the Timer switch functions only when the timer is set as
On . Provided that the camera works from 08:00 a.m. to 17:00 p.m., the steps
are as following:
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Timer Switch .