12
needed only when an improved firmware is available.
5 Mounting the Camera
When use the camera in outdoor environment, such as hunting or
monitoring the living habits of wild animals, you need to mount the device on a
certain place properly. It is recommended to mount the camera on a tree with
diameter about 15cm. To get the optimal picture quality, the recommended
distance is 5m from the tree to the target monitoring area and recommended
height from the ground is 1.5~2 meters. Adjust the viewing angel properly
(view angle of this camera is 52°).
There are two ways to mount the camera: using a band shaped belt,
bottom screw.
Using the belt:
To use the belt to fix the camera on a tree is illustrated in Fig.
4. Take the belt toes to go through the two back holes of the camera. At
the end, tie the two toes to the tree to finish fixing.
Using bottom screw.
Figure 4: Fixing the
camera
with belt
