Scout Boats 300 LXF, Руководство пользователя

Страница: 91 / 173

91
9.1 General
All water is drained by gravity or pumped to over-
board thru hull fittings located in the hull. It is
important to check the drain system frequently
to ensure it is free flowing and that the hoses on
the thru hull fittings are secure and not leaking.
Please review the drainage schematic to become
familiar with the location of the drain thru hull
fittings.
9.2 Hardtop Drains
There is a hole drilled in the center leg bases to
prevent water from being trapped within the leg
and provide a wire chase for accessories. A small
hole is drilled in the tubing at the base of the other
legs, which are not drilled for a wire chase, which
allows water to drain.
Notice:
Always make sure the leg drain holes are
clear when the boat is laid up for the winter.
Water trapped inside the legs could freeze
and cause the legs to split.
9.3 Bilge Drainage
The aft and forward bilge pumps are activated both
manually, by a switch in the helm switch panel and
automatically, by a float switch near the pump.
The automatic float switches are connected to the
batteries. The automatic bilge pump circuits are
protected by fuses located in the CZone modules
or circuit breakers in the cabin DC panel. They
remain activated when the battery switches are in
the OFF position and the batteries are connected.
The manual switches in the helm are supplied cur-
rent when the house battery switch is activated.
Chapter 9:
(A) Stern Bilge Pump
(C) Fishbox Overboard Diaphragm Waste Pumps
(B) Bilge Automatic Float Switch
(D) Fishbox Overboard Discharge Thru-Hull Fittings and Valves
Aft systems compartment & Bilge
DRAINAGE SYSTEMS
A
C C
D D
B
https://www.boat-manuals.com/