Scout Boats 300 LXF, Руководство пользователя

Страница: 107 / 173

107
Exterior Equipment
Helm Seats in Seat Position
Helm Seats in Leaning Post Position
Helm Seats
The helm seats are equipped with a flip up bolster
to provide more room between the seats and the
helm. The bolster converts the seat to a leaning
post style seat with a backrest, allowing the opera-
tor and passenger to sit or stand at the helm. To
convert each seat to a leaning post, lift the front
of the seat cushion to raise the bolster and push
it back above the seat cushion.
Arm rests on each side provide a more comfortable
driving position and swing up into the backrest
cushion to make it easier to enter and exit the
helm area.
A molded in footrest on the rear of the console
makes the helm more comfortable when the bol-
sters are set to the seat position.
Bow Seats and Storage Compartments
There are two storage/cooler compartments lo-
cated in the bow below the port and starboard
seats. Another hatch below the forward seat
provides access to the rope locker. The bow seat
cushions are secured to the hatches with snaps
and should be removed and stored when the boat
is not being used.
The port and starboard compartments are insu-
lated and can be used for dunnage, coolers or fish -
boxes. They are equipped with gas hatch springs
that hold them in the open or closed position and
drain overboard by gravity through fittings in the
hull sides. Drain plugs can be inserted in each
drain fitting to control drainage or isolate the
compartments from the seawater. If the com-
partments are used as fishboxes or coolers, they
Bow Seats & Below Cockpit Storage Compartment Hatch
Anchor Rope Locker Hatch
https://www.boat-manuals.com/