Scout Boats 245 Dorado, Руководство пользователя

Страница: 13 / 116

3
YEAR STEM TO STERN WARRANTY
+
10
YEAR TRANSFERABLE STRUCTURAL HULL
WARRANTY
Scout Boats Inc. has a limited transferable warranty that insures to the purchaser that each hull is free from structural defects
in materials and workmanship, (under normal care and use), for a period of ten (10) years from the original date of purchase.
Scout Boats, Inc. agrees to repair or replace, (at our discretion, based on review and/or observation of the hull in question),
to the purchaser, any boat(s) that is found to be defective during the applied warranty period. Scout Boats, Inc. also warrants
for a period of three (3) years to the original purchaser, that each new hull is free from non-structural defects, (i.e. defective
materials and/or workmanship). During this three year period Scout Boats, Inc. will cover the cost of replacing the part (both
part(s) and labor), excluding engines, which will only be covered by their respective warranties.
In order to receive warranty service, the selling dealer must register the boat on www.dealerscircle.com, and the purchaser
must take his/her boat to an authorized Scout Boats, Inc. dealer. Depending on the nature of the claim, Scout Boats, Inc.
may require the boat to be returned to our factory at 2531 Highway 78 West, Summerville, SC 29483, in which case all
transportation, haul-out, and/or loading charges shall be prepaid and the sole responsibility of the original purchaser. Scout
Boats, Inc. will reimburse up to one half of such transportation charges to the original purchaser upon the discover of a valid
and applicable warranty claim that is a direct result of improper manufacturing processes on the part of Scout Boats, Inc.
or one of our suppliers. The original purchaser must remove and reinstall, at his/her own expense, all outboard engines, (if
directly related to damage in question), as well as any and all personal effects and electronics equipment. The decision to
repair, replace or make reimbursement for a particular boat or part shall be at the discretion of Scout Boats, Inc.
Online registration, a bill of sale, or proof-of-purchase demonstrating individual in question as the purchaser, along with a
proof of customer’s identity, is required before warranty service can be rendered.
Scout Boats, Inc. does not warrant: (1) any Scout Boat which has been powered or loaded in excess of the manufacturer’s
maximum horsepower or capacity recommendations. The maximum horsepower and capacity recommendations are shown
on the certification plate affixed to every boat. (2) Any Scout Boat used in or for racing (of any type, organized or not),
commercial fishing, chartering or other commercial use. (3) Any Scout Boat which has been subject to misuse, neglect, or
structural alterations. (4) Gelcoat cracking, crazing, bubbling, or blistering. (5) Excessive wear due to unprotected and/or
over exposure to the elements. (6) Any boat that has been deemed to have been misused neglected or re-powered by anyone
other than the original purchaser. (7) Any Scout Boat sold to a customer, (who happens to be the original owner), by anyone
other than an authorized Scout Boats, Inc. dealer. (8) Any Scout Boat that has been used on a trailer that does not adequately
support the hull or any trailer that may be considered undersized, including any and all roller type trailers. (9) Any Scout
Boat with a jack plate installed by anyone other than Scout boats, Inc., or an authorized dealer, or on any hull other than the
160, 170, 180, 190, 200, 220, or 240 models. Any Scout Boat with a jack plate of 8” or greater. (10) Any part or component
not manufactured directly by Scout Boats, Inc. after the first three years of this warranty policy, (three years from date of
purchase), will only have that particular manufacturer’s warranty available.
Scout Boats, Inc. reserves the right to improve its product through changes in design or material without obligation to
incorporate such changes on boats built prior to the implementation of respected change(s).