Scotts S20500, Руководство оператора

Страница: 6 / 92

6 — English
CHAIN SAW SAFETY WARNINGS

Check for damaged parts. Check for alignment
of moving parts, binding of moving parts, break-
age of parts, mounting, and any other condi-
tions that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in
this manual.

All chain saw service, other than the items listed
in the operation and maintenance sections,
should be performed by your an authorized
service center.

Always maintain a proper stance.

Do not use chain saw if switch does not turn it
on and off. Have defective switch replaced by
an authorized service center.

Do not adapt your powerhead to a bow guide
or use it to power any attachments or devices
not listed for the saw.

Disconnect chain saw from power supply when
not in use, before servicing, and when making
adjustments and changing attachments, such
as saw chain and guard.

Do not cut vines and/or small underbrush.

Do not operate a chain saw in a tree, on a ladder,
rooftop, scaffold, or other unstable support; this
is extremely dangerous.
NOTE: The size of the work area depends on the
job being performed as well as the size tree or
work piece involved. For example, felling a tree
requires a larger work area than making bucking
cuts.

Do not force the chain saw. The job can be per-
formed better and safer at the rate for which it
was intended.

Always use the right product for your applica-
tion. The chain saw should be used for cutting
wood only. Never use the chain saw to cut plas-
tic, masonry or non-wood building materials.

Store chain saw when not charging or when not
in use. Chain saw should be stored in a dry and
high or locked area out of the reach of children.
When storing chain saw place the scabbard on
the bar and chain.

Use only with battery and charger listed. For use
with 20V lithium-ion battery packs. See Tool/
Appliance/Battery Pack/Charger Correlation
Supplement 990000811.

Battery operated units do not have to be
plugged into an electrical outlet; therefore, they
are always in operating condition.
Be aware
of possible hazards even when unit is not
operating.

Remove the battery pack from the chain saw
when not charging and before cleaning, servic-
ing, storing, removing material from the unit,
changing accessories such as the bar and
chain, or when not in use.

Save these instructions. Refer to them frequent-
ly and use them to instruct others who may use
this product. If you loan someone this product,
loan them these instructions also.