PRO-PAK
2
Compressed air airlines used with
Pro-
Pak
must be
SCOTT
products, approved
to EN 139.
Ensure that hoses used in an explosive
or inflammable atmosphere are marked:
ANTI-STATIC – EN 139.
Cost effective PVC hoses may be used in
other atmospheres.
Scott Health and Safety Limited
manufacture a range of anti-static and
PVC hoses, in lengths ranging from 15m
to 60m. Our
Customer Services
Department will be pleased to advise on
price and delivery.
1.4 APPARATUS DURATION
All durations quoted are nominal, based
on an Average Wearer Consumption
Rate of 40 L/min and FULLY CHARGED
cylinders. Actual Wearer Consumption
rates vary due to many factors, such as:
•
Workload: high work rates increase
consumption rates.
•
Weight of apparatus and use of
heavy or restrictive clothing.
•
Work environments with extremes
of heat or cold.
•
Physical fitness of the wearer.
•
Other factors include emotional
stress and fatigue.
•
Supplying cylinder air to a
resuscitator or rescue second
mask (RSM).
It is important that all wearers are aware
of these factors and take account of them
when assessing cylinder duration.
1.5 PERSONNEL TRAINING
Personnel who use self-contained,
compressed air breathing apparatus must
be fully trained in accordance with these
instructions and national regulations.
These instructions cannot replace an
accredited training course run by fully
qualified instructors in the proper and
safe use of
SCOTT
breathing apparatus.
Please contact
Training & Technical
Support Services
or your distributor for
training course details.
Training & Technical Support
Services:
Scott Health and Safety Limited
Pimbo Road, West Pimbo,
Skelmersdale, Lancashire,
WN8 9RA, United Kingdom.
Tel: +44 (0) 1695 711711
Fax: +44 (0) 1695 711775
1.6 SERVICING
Pro-Pak
must be serviced at scheduled
intervals by personnel who have
completed a formal training course and
hold a current certificate for the servicing
and repair of
SCOTT
breathing
apparatus. Details of the servicing
schedule are contained in the
SCOTT
Pro-Pak
Service Manual, copies of which
can only be obtained by registered
holders of a current certificate.
Your distributor or
Training & Technical
Support Services
will be pleased to
provide training course details and quotes
for service contracts. Please see above
for contact details.
1.7 SPARE PARTS AND
ACCESSORIES
Customer Services
provide an efficient,
friendly, customer contact point for
ordering new apparatus, spare parts and
accessories. The team can also provide
general information on
SCOTT
products.
Customer Services:
Scott Health and Safety Limited
Pimbo Road, West Pimbo,
Skelmersdale, Lancashire,
WN8 9RA, United Kingdom.
Tel: +44 (0) 1695 711711
Fax: +44 (0) 1695 711775
