Scott GENIUS 700, Руководство пользователя

Страница: 15 / 16

ENGLISH ENGLISH
•
REPLACEABLE DROPOUT
On Genius bikes of model year 2013 you can replace the rear derailleur hanger. Depending
on the different models you’ll find following options:
1. 142mm axle with RWS 142/12
This is available via the SCOTT distribution:
219574 complete set of RWS 142/12
219577 right side replaceable RD hanger
2. 135mm axle with RWS 135/5
This is available via the SCOTT distribution:
219572 complete set of RWS 135/5
219575 right side replaceable RD hanger
3. Regular 135mm rear axle with QR
This is available via the SCOTT distribution:
206473 replaceable hanger
If you want to use another RWS standard SCOTT also offers after-market parts for specific
wheelsets for the following parts via the SCOTT distribution:
219574 RWS 135/12 parts set
219576 right side replaceable RD hanger
•
REAR DISC BRAKE MOUNT
Genius can be used with 2 different disc rotor sizes
on the rear brake.
The rear disc brake on Genius is Postmount (PM)
Standard on the left seatstay and it is possible to use
disc rotors with 180 and 185mm diameter.
Please note that for the assembly of 185mm rotor
you might need adapters/washers between the PM
port on the frame and the brake calliper.
For 185mm rotor diameter you will need 2 red anodized spacers that can be ordered via the
SCOTT distribution with:
219568 Brake Mount Adapt Spacers 4mm f/185mm
•
FRONT FORK SET-UP/CHANGE OF FRONT FORK
For the set up of the front fork please use the fork specific manual attached to the bike.
We recommend using front forks with a travel of 150mm (700), 130mm (900) and
140mm (700 Plus), as this will not influence the geometry and alter handling of the bike.
For details on the technical length of the recommended forks please refer to the Tech Info
Chart before mentioned.
•
PIVOT MAINTENANCE
The pivot and bearings on SCOTT Genius are extremely easy to maintain.
An external treatment with a grease spray after every bike wash is all you have to do. We
do not recommend heavy grease sprays since these will leave a film on the parts which is
difficult to remove. We recommend the same for the chain also.
If you have to change the bearings you can order them included in a service kit at your local
SCOTT dealer or buy them with international parts number as shown above in the specs list
in a hardware store.
In case of a change of the bearings or of the rear swingarm you should contact your local
SCOTT dealer as you need special tools for disassembly and assembly.
29 |
2016 BIKE USER MANUAL | GENIUS GENIUS | 2016 BIKE USER MANUAL
| 28