Scott GENIUS 700, Руководство пользователя

Страница: 8 / 16

ENGLISH ENGLISH
•
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF FOX
CTD SHOCK
The assembly of the remote cable and the setup of the FOX CTD rear shock is very similar to
the abovementioned assembly and setup of the FOX Nude.
For more details on the FOX CTD please follow the details shown in the manuals of FOX
attached to this bike.
•
RECOMMENDED TOOLS FOR THE SHOCK SET-UP
For the set-up of the shock we recommend to use a shock pump with a scale up to 20
bars/300 psi with a special air valve connector preventing from air getting away while
removing the pump from the shock valve, this will result in an exact air pressure.
Please note that air will flow into the hose and indicator when counterchecking the air
pressure, so you have to set up again the recommended pressure after this action.
Make sure to balance at least this air loss when you make a check of the air pressure of the
shock. Please also note that the indicators of shock pumps have a tolerance of max. 10%.
•
SET-UP GENIUS WITH FOX NUDE OR FOX CTD SHOCK
The Set-Up of the FOX Nude or FOX CTD Shock can be easy done within a few minutes.
IMPORTANT!
For all adjustments of the air spring the remote lever has to be in position “all travel”
To adjust the air pressure of the air chamber of the FOX Nude or FOX CTD Shock please
refer to the following instruction:
1. Remove the valve cap of the valve (s5) located on the shock housing (S3).
2. Mount the shock pump with its adaptor on the valve
3. Please take into account that it takes some air pressure from inside the shock to drive the
indicator on the pump. Make sure to balance at least this air loss when you make a check
of the air pressure of the shock. Pls also note that the indicators of shock pumps have a
tolerance of max. 10%
4. Please use the FOX iRD App available at the iTunes App store with following link:
https://itunes.apple.com/us/app/fox-intelligent-ride-dynamics/id549035102?mt=8&ign-
mpt=uo%3D4)
5. After downloading the app on your mobile gear please follow the steps shown in the app
and inflate the shock according to the air pressure indicated.
6. When you reached the needed pressure remove the pump and put the valve cap on
the valve.
15 |
2016 BIKE USER MANUAL | GENIUS GENIUS | 2016 BIKE USER MANUAL
| 14