Scott Safety SEMS II страница 4 Скачать руководство пользователя

Страница: 4 / 36

Page 4 of 36

P/N 595289-01 Rev B 5/15

SYSTEM DESCRIPTION CONTINUED...

EXAMPLE OF IMPERIUM BASE STATION SCREEN DISPLAY

SEMS II ACCOUNTABILITY SYSTEM BASE STATION

The base station consists of a IMPERIUM Accountability Software, USB Gateway or

PCMCIA card SEMS II receiver, and/or optional APX RF Modem receiver installed on

a Windows

based Personal Computer (not included). SCOTT recommends use of a

laptop computer designed for rugged use. Refer to the SCOTT CONNECT IMPERIUM

ACCOUNTABILITY BASE STATION SOFTWARE Installation and Use instructions,

SCOTT P/N 595290-01, in the HELP directory of the IMPERIUM software for complete

system specification details, set up and operation.

With the Imperium Event Management Software running on the PC, the incident com-

mander has current information about status of the respirator users who are logged

onto the Base Station, including information about air supply levels and PASS activa-

tion. Simple dedicated functions in the software control the transmission to (SEMS

II only) and receipt of signals from (SEMS II and BLUEtootth) respirator users. The

same computer can be used for programming the ID Tags used with the SEMS II PDA.

WINDOWS

is a registered trademarks of MICROSOFT CORPORATION, Redmond, Washington

SEMS II BASE STATION WITH USB GATEWAY INSTALLED ON

A LAPTOP PERSONAL COMPUTER

WARNING

AUDIBLE ALARMS WILL ONLY SOUND FROM

THE BASE STATION WHILE BASE STATION

COMPUTER SPEAKERS ARE TURNED ON.

MUTING THE SPEAKERS WILL RENDER

THE BASE STATION ALARMS SILENT. BASE

STATION COMMANDER MUST NOT MUTE

THE BASE STATION SPEAKERS DURING AN

ACTIVE EVENT. FAILURE TO MONITOR AND

RESPOND TO AN ACTIVE ALARM COULD LEAD

TO SERIOUS INJURY OR DEATH.

APX RF MODEM

Содержание SEMS II





































Результаты поиска

Содержание SEMS II

Отзывы:

Похожие инструкции для SEMS II

Бренды по названию

Популярные бренды

Scott Safety SEMS II, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание SEMS II

Отзывы:

Похожие инструкции для SEMS II

Бренды по названию

Популярные бренды