manualshive.com logo in svg

Scott Safety SEMS II, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Scott Safety SEMS II Скачать руководство пользователя страница 22

Page 22 of 36

P/N 595289-01 Rev B   5/15

When performing the REGULAR OPERATIONAL INSPECTION verify that 

the Sensor Module lights are operating as described below:

OPERATION OF SENSOR MODULE LIGHTS

NOTE

THE ORANGE LIGHT IS A COMBINATION OF THE RED, GREEN, AND BLUE 

LIGHTS THAT APPEARS ORANGE FROM A DISTANCE. AT CLOSE RANGE THE 

INDIVIDUAL LIGHTS MAY BE VISIBLE.

            ACTION... 

SENSOR MODULE LIGHTS WILL…

Start up PASS (Open Cylinder) .................................................. Bright Light then Flash GREEN
Normal Operation ........................................................................ Flash GREEN
Respirator Low air (1/3 cylinder) ................................................. Flash ORANGE (alternately)
Low Battery while ON .................................................................

GREEN light stops flashing

Shut down  .................................................................................. Lights OFF
Press RESET w/unit OFF (BATTERY TEST)  ........................... Bright Light then: 
 

Flash GREEN if Good/Flash RED if Low

Press MANUAL ALARM with unit OFF  ..................................... Flash GREEN then Full Alarm Flash RED
Press RESET from manual alarm  ............................................. Returns to Flash GREEN
PASS Pre-Alarm  ........................................................................ Flash RED (alternately)
PASS Full alarm ......................................................................... Flash RED (simultaneously)

REGULAR OPERATIONAL INSPECTION CONTINUED...

Содержание SEMS II





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды