Scott Safety Protege, Руководство пользователя

Страница: 32 / 104

8
CHAPTER 2: INSTALLATION
087-0038 REV L SCOTT SAFETY
Charging the Battery
with the Multi-Charger
(Optional)
This section provides information about charging the battery when using the optional
Multi-Charger.
The Multi-Charger can be used to charge up to six (6) devices simultaneously. Unlike
the single Power and USB Communications Module, the Multi-Charger does not need
to be connected to a PC. It only function is charging the devices.
To wall-mount the Multi-Charger (if desired), use two (2) screws (#8 or #10 Head)
6.0” (15.24cm) apart. Screws should not protrude greater than 0.25” (6.35mm). See
Figure 3 .
Figure 3 Multi-Charger Mounting
To use the Multi-Charger, connect the AC power source to bottom receptacle. Insert
device with the alligator clip in the up position as shown on the front of the
Multi-Charge (decal) and push the device to snap-insert in place. See
Figure 4 .
6”
(15.24 cm)
CL
1.92”
(49 mm)