FOR THE INSTALLER
Installation Limitations:
This ice system is designed to be installed
indoors, in a controlled environment:
Min
Max
Air Temperature
50
0
F
100
0
F
(Not including the remote condenser)
Water Temperature
40
0
F
100
0
F
Water Pressure
20 PSIG
80 PSIG
Voltage
-5%
+10%
(Compared to the nameplate)
Operating the machine outside of the
limitations is misuse and can void the warranty.
Water Limitations:
An ice machine is a food manufacturing plant;
it takes a raw material, water, and turns it into
a food product, ice. The purity of the water is
very important in obtaining pure ice and in
maximizing product life. This is not intended
as a complete resource for water related
questions, but it does offer these general
recommendations:
1. Check with a water treatment specialist for
a water test, and recommendations regarding
filters and treatment.
2. In most cases, the water used to make ice
should be filtered or treated, depending upon
the water.
There is no one type of water filter
that will be effective in all situations.
That is
why a water test is important.
Scotsman Ice Systems are designed and
manufactured with the highest regard for
safety and performance. They meet or
exceed the standards of UL, NSF, and CSA.
Scotsman assumes no liability or responsibility
of any kind for products manufactured by
Scotsman that have been altered in any way,
including the use of any part and/or other
components not specifically approved by
Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to
change without notice.
1.25"
21.12"
Drain
3/4"
FPT
Typical Storage Bin - B90
NM1850R
September, 1992
Page 3
