FOR THE INSTALLER
The NM1850R is designed to fit
the following Scotsman storage
bins:
••
B90 and extentions, with bin
top KBT18.
••
BH800 no bin top needed.
••
BH900 using bin top KBT14.
When installing a new system,
check to be sure that you have
everything you need before
beginning:
••
Correct Bin
••
Correct Ice Machine
••
Correct Bin Top
••
All kits, legs, and information
required for the specific job.
BACK VIEW
Liquid Line
Connection
(right system)
Discharge Line
Connection
(left system)
Remote Condenser
Junction Box
Electrical Inlet
Water Inlet 3/8" Flare
Drain 3/4" FPT
21.66"
3"
5.25"
20.84"
Allow 6"
above
machine for
service.
15.53"
21"
3.1"
3.1"
4.5"
9.43"
17.8"
18.8"
There are two separate ice making
and refrigeration systems in this
model. The liquid and discharge
lines from each system must go to
separate circuits in one remote
condenser (RC1052).
* Minimum Circuit Ampacity is used to determine wire size and type per National Electric Code.
The Standard Finish is Enamel - Sandalwood. There is an optional stainless steel panel kit,
SPKFM42 available to convert the unit to Stainless Steel. It is field installed.
Model
Number
NM1850RE-32A
NM1850RE-3A
Dimensions
(w/o bin)
H X W X D
27" x 42" x 24"
same
Basic
Electrical
208-230/60/1
208-230/60/3
Ice
Type
NUGGET
same
Cond.
Type
R/Air
R/Air
Min.
Circuit
Ampacity
18.2
15.5
Max
Fuse
Size
25
20
TOP VIEW
Allow 6" of space behind the machine
for utility connections.
Ice Chute
6.7" x 6.2"
34.84"
13.84"
18.28"
SPECIFICATIONS: ICEMAKER
NM1850R
September, 1992
Page 2
