Reservoir.
1. Shut off the water supply.
2. Remove the top panel.
3. Remove the right side panel.
4. Drain the water reservoir and evaporator.
5. Disconnect inlet and outlet tubes from the
reservoir.
6. Remove thumbnut holding reservoir to its
mounting bracket.
7. Remove reservoir from the machine.
8. Reverse to reassemble.
Float Valve
1. Shut off the water supply.
2. Remove the top panel.
3. Remove the reservoir cover.
4. Remove the water inlet tube.
5. Remove nut (at inlet) holding valve to tank.
6. Replace with a new valve.
Cover
Float
Tank
Water Inlet
Water Level
Thumbnut
Hose To Evaporator
Overflow
Hose
MFE400
May 1994
Page 20
