OPERATION: Water
Water enters the machine through the 1/4" male
flare at the rear of the cabinet, goes past the water
pressure switch and then to the water reservoir
which it enters through the float valve. The water
then goes out the bottom of the reservoir tank to
the bottom of the evaporator.
Reservoir overflows routed to the drain. Water
cooled models have a separate water circuit for
the cooling water: it enters the fitting at the rear,
goes to the water regulating valve, then to the
water cooled condenser and down the drain.
WATER
INLET
PRESSURE
SWITCH
WATER RESERVOIR -
FLOAT VALVE
WATER SEAL
SPOUT
SAFETY
SWITCH
ICE
CHUTE
BIN
THERMOSTAT
BRACKET
RESERVOIR
OVERFLOW
DRAIN
AUGER DRIVE
MOTOR
ICE AND WATER SCHEMATIC
"B" MODEL
MFE400
May 1994
Page 11
