Switch Panel Area
There is standard front access to two switches – on
and off.
To switch the machine OFF, push and release the
Off button. The machine will shut off at the end of
the next cycle.
To switch the machine ON, push and release the
On button. The machine will go through a start up
process and then resume ice making.
Control Options
There are two optional, field installed controls that
can be on this machine.
•
KVS Adjustable ice level control
•
KSBU Advanced Feature control
Adjustable ice level control (optional)
When this option is present there is an adjustment
knob and an additional indicator light to the right of
the four standard indicator lights. The ultrasonic ice
level control allows control of the point that the ice
machine stops making ice. Reasons for this
include:
•
Seasonal changes in ice used
•
Planning to sanitize the bin
•
Faster turnover for fresher ice
Use of adjustable ice level control
There are several positions the ice level can be set
to, including Off (knob and label indicators lined
up), where it fills the bin until the standard bin
control shuts the machine off. See the kit’s
instructions for complete details.
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it
shuts off the Bin Full indicator light next to the
adjustment knob will be On.
Note: Ice will build up in the bin at an angle, the
distances controlled will be from the sensor to the
top of the ice directly beneath it.
The actual distance between the highest point of
the ice may be closer or further away, depending
upon the angle of the ice.
October 2010
Page 18
C2648
Remote Condenser Models - User Manual
Power
Status
Water
Off
De-Scale
On
02-4294-01 Rev. A.
Adjust Ice Level
Lo
wer
Bin
Full
Vari-Smart Control Area
Adjust Ice Level
Lo
wer
Bin
Full
Maximum Ice
Level
Minimum Ice
Level
