7
HANDS-FREE OPERATION
SWITCHING BETWEEN SOURCES
Your BlueFusion system appears as an XM source to the Factory radio. This is
why it is required to go to the XM Radio band first to your BlueFusion screen
While using other sources other than XM (BlueFusion) the interface will
automatically switch to the XM source when you have an incoming phone call.
The radio switches through the sources to find the XM source on the radio,
some audio may bleed through while switching sources. When a phone call
is ended, your radio will NOT automatically switch back to the original source
you were previously on, this feature only works when previously listening to XM
radio. Use the source buttons to switch back to the original source you were
using previously on.
AM
FM
CD
DVD/
NAV
XM Sat
BlueFusion
AUX
AUTO-CONNECT/ DISCONNECT (ENTERING AND LEAVING THE VEHICLE)
When the vehicle is started, BlueFusion will automatically to the phone which it
was last paired. Some cellular phones may not freely disconnect and re-connect
without user input. If you are having difficulty with this process there may be
additional setting required in your particular phone that will set BlueFusion as a
“trusted” device. This operation may vary between phone brands and models.
If you are already on an active call and you enter and start the vehicle,
BlueFusion will automatically switch the call to hands-free mode.
If you are on an active call and the vehicle is turned off, BlueFusion will
automatically transfer the call to the handset.
VOICE DIALING:
NOTE:
This feature activates the Voice Dial within your cell phone. (Your phone
must be voice dial compatible). Voice tags or entries are stored in your phone,
not BlueFusion.
TO ACTIVATE VOICE DIAL ON RADIO:
Scroll to Voice dial in BlueFusion main menu and:
FOR NAV RADIOS
- Press Preset 3 once to activate voice dial.
FOR NON-NAV RADIOS
- Press Preset 2 once to activate voice dial.
