11
TROUBLE SHOOTING
For all issues take the following steps first before moving on to any other trouble
shooting. This process insures complete initialization.
1) Turn off vehicle.
2) unplug interface.
3) Enter vehicle and close all doors.
4) Wait until the vehicle computer enters “Sleep” Hibernation.
(After approx. 3 min. Listen for click sound in thee doors).
5)Without opening doors, plug in interface.
6) Start engine.
Unit has been installed properly but BlueFusion screen does not display.
Pair phone and make outgoing phone call from any source. OEM radio will
switch to BlueFusion screen automatically. If this does not occur check vehicle
compatibility chart for your vehicle.
NO AVRCP CONTROL
RANGE ISSUE
DEVICE NOT FOUND
BAD CALL QUALITY
NO SOUND
AUDIO DROP OUTS
Verify that the paired device supports AVRCP functionality.
Bluetooth standard range maxing out at 30 feet, may vary
due to environment.
Delete all previous pairing attempts and try again.
Make sure the cellular is within range of the module (30ft.).
Make sure the signal reception of the cellular phone is strong.
Make sure the module is on and paired to transmitting device.
Make sure the volume is correct, check both the radio and
the transmitting device, and other items within range.
Make sure the transmitting device is at a good battery state.
If the item in on low battery, please recharge.
NOTE:
Due to every phone having different software and functionality features,
many phones may work different with the Bluetooth module of the BFGM. We
recommend contacting the Scosche Technical Support at 1-800-621-3695 Ex.3
with any common or reoccurring issues.
TROUBLE SHOOTING
NOTE:
DUE TO EVERY PHONE HAVING DIFFERENT SOFTWARE AND FUNC-
TIONALITY FEATURES, MANY PHONES MAY WORK DIFFERENT WITH THE
BLUETOOTH MODULE OF THE BFTAK. WE RECOMMEND CONTACTING THE
SCOSCHE TECH SUPPORT AT:
1-800-621-3695 EXT.3
WITH ANY QUESTIONS.
