TECH TIP:
Aim the microphone in the direction of the driver’s headrest.
MICROPHONE INSTALLATION:
1. Attach the microphone to the headliner above the rear view mirror.
2. Carefully route the microphone cable behind the headliner and down the “A”
(front most) pillar. Use caution when routing cable and avoid sharp edges or
moving metal parts.
3. Route the cable to the BlueFusion interface location and plug it into the 3-pin
connector on the Scosche “T “harness.
3
PAIRING YOUR CELLULAR PHONE
MICROPHONE INSTALLATION
IMPORTANT NOTE:
Your Bluetooth cellular phone must be paired with the
BlueFusion system before use. Once the initial pairing process has been
completed, your phone should easily connect and disconnect to BlueFusion
during normal use.
PAIRING INSTRUCTIONS:
1. Once the hardware has been properly installed, insert the key and start the
vehicle. The BlueFusion interface needs to read the vehicle’s ignition codes to
properly initialize.
2. Press the “AM/SAT”, or “SAT” button on the radio to get to the XM Sat radio
source.
NOTE:
On Toyota Highlander: PRESS FM2 then AM to access the
SAT Radio source.
3A.Vehicle’s with Satellite Radio installed: Press #6 preset button or touch
the “->Bluefusion” button on Navigation radios to get to BlueFusion screen.
3B. Vehicle’s without Satellite Radio installed. BlueFusion menu screen will
be displayed at this step. You do not have to use Preset #6 Button or the
“->Bluefusion” touch screen button to switch between Satellite and
BlueFusion screens.
4. Once in the BlueFusion mode, you will hear a beep tone indicating that
BlueFusion is in pairing mode. (BlueFusion enters pairing mode automatically
when the Ignition is turned on and no phone is currently paired.)
5. From your phone’s Bluetooth menu, perform a search for new devices (refer
to your cell phone user manual). The phone should display “BlueFusion”
6. Select [pair to] BlueFusion and enter pin code 0000 when prompted. This will
complete the pairing process. (Once your phone paired with BlueFusion, the
beep tones should stop and BlueFusion is now ready for use.)
