Rev.01 07/22
7
Figure 4: motion sensor operation with siren facing sideways.
The alarm will only detect in the direction as indicated by the arrow in the drawing above. In order
for alarm to correctly detect a change of inclination the siren cone should either point towards the
front of the vehicle or towards the rear of the vehicle.
Figure 5: motion sensor operation with alarm fitted vertically.
If fitted in an arear that the alarm may be subjected to water, the wire rubber sheath must be
turned downwards to prevent water from entering the unit.
NOTE:
Prior to fitting, test the operation of the sensor to confirm it will work in the intended
position.
OR
To front of
Caravan
To rear of
Caravan
OR
To rear of
Caravan
To front of
Caravan
Содержание SIGS39
Страница 1: ...Rev 01 07 22 Installation Guide ...
Страница 9: ...Rev 01 07 22 9 6 0 WIRING DIAGRAM AND PINOUT ...
