SCORPION SIGS39, Руководство по установке, Страница: 10 / 15

Rev.01 07/22 10
7.0 - PAIRING NEW DEVICES
7.1 - With GREEN/BROWN wire ground connection
The alarm is supplied with 2 remote controls and 1 override key but other optional devices can be
added.
To pair a new device, proceed as follows:
•
Arm and then disarm the alarm via remote control or override key.
•
Within 20 seconds of disarming the alarm ground the GREEN/BROWN wire.
•
Connect the WHITE-VIOLET wire to ground.
•
Press the ignition simulation switch to ON.
•
A Beep and a Bop will confirm the system is in learn mode.
•
Remove the WHITE-VIOLET wire from ground.
•
Depending on which device is to be paired either press one of the remote-control buttons
OR touch the override key to its receptacle OR make the magnetic contact transmit (bring
contact and magnet together and then move apart) OR press the button on the opening
detector, make the infrared sensor or wireless hyper-frequency sensor transmit (refer to
sensor instructions).
•
A Beep will confirm the operation has been completed successfully.
•
To pair another device, ground the WHITE-VIOLET wire for 1 sec.
•
To exit learn mode, press the ignition simulation switch to OFF.
•
A Bop will confirm the end of the procedure. Remove the GREEN/BROWN wire from ground.