SCORPION SIGS39, Руководство по установке

Страница: 3 / 15

Rev.01 07/22 3
1.0 – Alarm Positioning
For maximum security the alarm should be mounted inside the caravan.
To ensure maximum sound volume in the event of an alarm trigger it is recommended that the
alarm is mounted close to an external air vent, if this is not possible it may be necessary to install an
air vent.
Note:
Should the alarm be mounted in an area rain may enter, please ensure that the alarm is
mounted as in the image below.
Warning
If a jet wash is used to clean the vehicle, protect the alarm unit from water splashes and be careful
not to expose it to high pressure jets.
The warranty will not cover damages to the system due to water infiltrations caused by improper
installation, improper jet washing or the use of non-original accessories, not approved by the
manufacturer.
Do not install the alarm unit in this position as water
ingress over time may seep through the rubber sheath
and permanently damage the electronic circuit making
the alarm system unreliable. Eventual malfunctioning
due to water infiltration is not covered by warranty.
•
Install the alarm as shown in the picture opposite to
prevent water from entering.
•
Give the rubber sheath a `goose neck’ bending as shown
and secure with a cable tie.
•
Install the alarm away from moving mechanical parts,
electric or electronic components that could generate
high frequency electromagnetic disturbances and away
from devices that could reach high temperatures when in
use.