background image

DataPage MK2 (USA) Desktop UHF Radio Paging System 

DPUSA 02/00

 4 

 

 

Issue 2

 

PREFACE 

 
 

Warranty 

 
This product is warranted as free from defects of workmanship and materials for a period of one year from the 
original purchase date. During this time, if there is a defect or malfunction of this product, Scope will, with proof 
of purchase, repair or replace at its discretion any defective parts, free of charge. This does not include where 
the adjustments, parts and repair are necessary due to circumstances beyond the control of Scope, including but 
not limited to fire or other casualty, accident, neglect, abuse, abnormal use or battery leakage damage. 
 
There are no other expressed or implied warranties except as stated herein, and those excluded include those of 
merchantability and fitness for a particular purpose. In no event will Scope or any of its agents be liable for direct, 
indirect, special incidental or consequential damages resulting from any defect in the product, even if advised of 
the possibility of such damages. 
 
The warranties and remedies set forth above are exclusive and in lieu of all others, oral or written, expressed or 
implied. No Scope distributor, dealer, agent or employee is authorized to make any modification, extension or 
addition to this warranty. 
 
Some states do not allow limitations on how long an implied warranty may last and some states do not allow 
exclusions or limitation of incidental or consequential damages. 
 

Warning ! No User Serviceable Parts 

 
Alteration or modification to any part of this equipment, without the prior written consent of the manufacturer, will 
invalidate all manufacturer approvals and warranties.  No adjustments can be undertaken except by qualified 
and licensed persons as defined by the FCC Rules and Regulations. Operation of altered equipment can result 
in fines, imprisonment, and/or confiscation of such equipment. 

 
 
 
 

© Scope Marketing (Communications UK) Ltd, 2000 All Rights Reserved 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание DataPage MK2






















Отзывы: