4
© 2007-2009 SCK Direct, Inc. 229-51363 Rev C www.MySCK.com
SmartDirect 2
TM
Direct, Inc.
Status LED Chart
Signal LEDs
Troubleshooting / LED Codes
LED Action
Description
Strobe effect using all LEDs
Device is scanning the channels for
available networks
All LEDs blink on and off
simultaneously every
500ms
Device has detected a multiple SCK
address conflict and is waiting for
resolution (currently participating as
address 30)
All LEDs blink in two short
bursts followed by one
second of off time
The device is connected to network
but not to a FAST control
communicating SCK.
LEDs alternate being lit in
sequence for a period of
time.
A diagnostic command was issued
to this device to blink the LEDs in a
recognizable pattern for a set
amount of time.
Bars
Link Quality
NONE (0)
No signal or No messages received
ONE (1)
Moderate signal
TWO (2)
Good signal
THREE (3)
Excellent signal
Signal Strength Indicator
INDICATOR CHARTS
LED Color
LED Blink Rate
Description
RED
Solid On
Device is connected as
a router
RED
Slow
Device is waiting for
data from its parent
node
RED
Very Fast
Device is communicat-
ing with another
device as a
router. Signal bars
should exist.
GREEN
Solid On
Device is connected as
a coordinator
GREEN
Very Fast
Device is communicat-
ing with another
device as a coordina-
tor. Signal bars should
exist.
ORANGE
2 sec ON,
2 sec OFF
Device cannot commu-
nicate with the SCK
device after already
connecting to the wire-
less network.
ORANGE
Very Fast
Device is initializing.