2
© 2007-2009 SCK Direct, Inc. 229-51363 Rev C www.MySCK.com
NOTICES
SCK Direct, Inc. is not liable for any use of product not
in accordance with SCK Direct, Inc.’s installation and
operation instructions.
CLEANING
Using a clean damp cloth, wipe down the
SmartDirect 2 when necessary using a commercial
quality foodservice-approved detergent. DO NOT
IMMERSE.
NEVER use chemical or abrasive cleaners on the
SmartDirect 2.
TOOLS REQUIRED FOR INSTALLATION
Drill Bit: 3/16” if using wall anchors; #50 if
installing into metal
Hammer
Phillips Screwdrivers
TOOLS REQUIRED FOR
TIER 2 PROGRAMMING
Laptop running Microsoft Windows XP/2000
USB Cable
INCLUDED PARTS
Please confirm that these parts have shipped with
your order:
231-60243-01 (GPRS) or 231-60243-03 (Ethernet)
version
229-51363 Installation Manual
229-51364 MAC ID Form
213-50642 Mounting Kit
213-50759-01 Power Supply Mounting Kit
127-66578 Cable for Ethernet Version, 10 foot
If anything is missing, please call 1-866-840-4271
(8:00 a.m. - 5:00 p.m. EST).
BEFORE YOU INSTALL
The SmartDirect 2
TM
unit should be installed before
installing your SCK SmartSensor(s) (if applicable).
Changes or modifications not expressly
approved by SCK Direct, Inc. could void
the user's authority to operate the equip-
ment.
NOTE
: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
Consult the dealer for help.
SmartDirect 2
TM
Direct, Inc.
POWER SUPPLY
213-50759-01
POWER CORD OPTIONS
126-10028: Power Cord U.S.
126-10029: Power Cord Euro, Round
126-10030: Power Cord UK, Flat