INCU-C Series V2018.1.1
3
1. The electrical supply circuit to the incubator must conform to all national and local electric
codes. Check the serial-data plate for voltage, cycle, phase and amperage requirements before
you connect the unit.
2. Only use grounded power source (outlet) to avoid an electric shock or fire.
3. In case of a problem, do not attempt to repair the product yourself. Do not open the power box
to avoid electric shocks.
4. Do not pull out the plug when the unit is in use. Never drag on the wire to unplug the unit.
5. A separate branch circuit is recommended to prevent loss of samples due to overloading or
failure of other equipment on the same circuit.
6. A surge protector is recommended to avoid power-related faults.
7. In case of malfunction or burning smell, the unit must be unplugged immediately .Use a circuit
breaker to cut off the power supply. Continuance of abnormal state will end up with fire as a
result of overheating.
8. The electric power supply must be cut off in following situations:
8.1. When opening the door of electrical power box. Opening the top cover without cutting off
power supply might result in electric shock.
8.2. When replacing the fuse. Replacing the fuse without cutting off the power supply will
probably result in electric shock.
8.3. When a malfunction occurs, mishandling will result in the further damage of the equipment
or accidental injury.
8.4. If you do not use the unit for a long period of time.
9. Never touch the glass door and/or inner chamber when the incubator is hot.
Safety instruction!
Please be sure to follow the instructions, they are really im-
portant for your safety.
Danger!
Warning against damage and injury.
