Rotary Evaporator
9
Oil mode
indicator
The indicator is on when the heating
bath is in the oil bath mode
Heating
indicator
The indicator is on when the Heating
bath is in the heating state
Temperature
adjustment
knob
Turn the knob clockwise to increase the
parameter and counterclockwise to
decrease the parameter
Press this key to start / stop the
instrument
Press the key for 3s to switch the
heating mode
Heating bath
power switch
Turn on / off the main power supply to
the heating bath
Table 2
4.2 Display
After the main unit is turned on, the interface is on and
indicates the real-time speed:
Fig. 6
This interface indicates the real-time speed. Turn the
adjustment knob to set the speed and press the adjustment
knob to start the instrument. The rotation speed can be
changed by turning the adjustment knob while the
instrument is in operation. After setting, the interface
automatically changes to real-time speed.
Press the “
INT”
key to stop the motor, with LED indicating
“txxx” (xxx is the intermittent operation interval, to be set
within 1-999sec), as shown in the figure.
Fig. 7
Turning the adjustment knob can adjust the forward and
reverse rotation interval time. The instrument only rotates
forward when the forward and reverse rotation interval time
is 0.
After setting, by pressing the “
INT
” key, the interface
changes to the real-time speed display.
