P2.0 Clear Memory
1. Press
MODE
to select the parameter you want cleared before
entering Setup Mode.
2. Press
SET
for 2 seconds to enter setup.
Press
▲ to select memory clear function.
3. The
“CLR” icon appears on the
middle display and P2.0 illuminates in
the lower display.
4. Press
MN/MX/AV
to enter P2.1.
The default
“NO” icon flashes on the
middle display and P2.1 appears in the
lower display.
5. Press
▲ to change the status from “NO”
on The display to
“YES” and then press
MN/MX/AV
again to confirm clearing of
all memory. The LCD display will return
to P2.0 when memories are deleted.
CAUTION:
THE MEMORY CLEAR PROGRAM IS DESIGNED TO
CLEAR 99 MEMORIES AT ONE TIME. PLEASE CONSIDER
CAREFULLY IF YOU DECIDE TO CLEAR THE MEMORY AS
THIS OPERATION CANNOT BE REVERSED.
P3.0 View Slope & Offset
1. Press
MODE
to select probe type as pH.
2. Press
SET
for 2 seconds to enter setup.
3. Press
▲ until the icon “ELE” appears in
the middle display and P3.0 appears in
the lower display.
6
