Scientific Ultra254 950, Руководство по эксплуатации

Страница: 10 / 14

10
Lamp breakage
See the instructions in the safety section above
Lamp replacement
1. Remove a lamp cover by removing the 4 thumbscrews and by carefully sliding the cover off the
end of the lamp
2. Wear latex or nitrile gloves
3. Fully depress the red button on the top of the lamp socket and lift the lamp away from the
socket by holding its base connector
4. Hold the new lamp by the base connector with your thumb on the top of the connector and
slide the four pins down the 4 slots until it is seated. When the lamp is seated correctly it will
not pull out of the socket
5. Replace the lamp cover by sliding in over the lamp making sure the end of the lamp is captured
by its holder in the end cap
6. Replace the 4 thumbscrews, finger tight
7. Put lamp(s) in a sealed plastic bag and take them to your local waste facilities for recycling
8. Lamp contains mercury. Manage in Accord with Disposal Laws. See www.lamprecycle.org or call
(800) 555-0050