Scientek SW-4600GWD Скачать руководство пользователя страница 47

Страница: 47 / 90

Operating and Maintenance Manual

Scientek Washer Model SW-4600GWD

Revision 4, June 2005

Scientek Technology Corporation

Tel: (604) 273-9094

11151 Bridgeport Road, Richmond, BC V6X 1T3

Fax: (604) 273-1262

7-1

Section 7

MAINTENANCE

7.1 SCHEDULE

Set up a schedule for periodic inspection and maintenance, following established institutional

practices. Scheduling preventive maintenance will be, to a large extent, dictated by the D.I. water

content of the water supply.

7.2 SURFACE CLEANING

Clean the exterior surfaces of washer at least once a week. Any commercial stainless steel

cleaner or polish may be used. In addition to keeping the machine looking new experience shows

that a clean, well-maintained machine invariably encourages more efficient and careful use of

equipment.

7.3 CHAMBER INTERIOR

Periodically or as required by the local water supply, it will be necessary to remove scale from

inside surfaces of the tank. The scale can be removed with a solution of buffered hydrochloric

acid or commercial "Mildstone" remover. Consult the detergent supplier for recommended

procedures.

7.4 DEBRIS BASKETS AND SUMP SCREEN

a. Remove header from washer chamber.

b. Remove the debris baskets located at the bottom of the chamber by lifting it upwards.

c. Wash the screens under a forceful stream of tap water to remove all soil, and replace in

the sump.

NOTE: Do not leave debris below screens to get trapped in spray jets.

Содержание SW-4600GWD



























































































Результаты поиска

Содержание SW-4600GWD

Отзывы:

Бренды по названию

Популярные бренды

Scientek SW-4600GWD, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание SW-4600GWD

Отзывы:

Бренды по названию

Популярные бренды