manualshive.com logo in svg

Scientek SW-4600GWD, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Scientek SW-4600GWD Скачать руководство пользователя страница 45

Operating and Maintenance Manual 

 

 

Scientek Washer Model SW-4600GWD 

Revision 4, June 2005

 

 

 

Scientek Technology Corporation 

 

Tel:  (604) 273-9094 

11151 Bridgeport Road, Richmond, BC V6X 1T3 

 

Fax:  (604) 273-1262

 

6-26

6.6  ALARM LIST 

 

The alarm list holds the information about abnormal conditions that may have occurred during 

the washer’s operation. 

The following conditions are monitored: 

-

 

sump water level 

-

 

sump and dryer temperature sensors, converters and reading in regard to the alarm 

set-points 

-

 

soiled and clean doors’ position 

-

 

load and unload rams (on Load / Unload model) 

-

 

motor starters for wash pump and the dryer fan 

 

The list can hold up to 50 records. The latest alarm event is always inserted to the top of the 

list. Up to 20 alarm events may be displayed on one screen.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the  

  or  

  buttons to scroll through the whole list.  

Every alarm record has the date/time stamp, which is very useful in troubleshooting the 

system and tracking down the operational problems.  

The red checkbox on the left side of each record indicates the acknowledgement status.  

All alarms must be acknowledged in order to re-start the washer’s operation. 

 

The ‘ACKN ALL’ button will acknowledge all active alarms. The ‘CLEAR LIST’ button will 

delete all the records from the list. The ‘CLEAR LIST’ button is enabled by turning the 

Service switch to ON position. 

Both the ‘ACKN ALL’ and the ‘CLEAR LIST’ button must be held pressed for about two 

second to activate their respective function. 

Use the ‘PREVIOUS SCREEN’ button to return to either Operation screen or the Main Menu 

screen. 

Содержание SW-4600GWD



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды