©
2004, Satloc LLC
Page 64 | GPSteer User Guide
3. Set the Sensitivity
After setting the proportional band, adjust the sensitivity setting.
a.
Select
System > Steering Setup Menu > Manual Turn:
. Press
to turn off
Manual Turn
mode and return to
automatic steering.
b. Drive the vehicle in
Run
mode, set your A|B points, and
engage GPSteer.
c. Drive your vehicle in a straight line for a minimum of 500
feet (maximum of 1/4 mile) and observe how the vehicle
behaves on the line.
d. Adjust the sensitivity as needed, as shown in the following
examples. Select
Swath Setup > Sensitivity
from the
controller’s main menu.
Vehicle Path Key
:
Desired steering path
1 m = 3’ boundary line
GPSteer Installation Guide.book Page 64 Thursday, June 17, 2004 10:51 AM
Содержание Satloc GPSteer
